Continue reading " />

The Stetzerizer Home Kit

[table id=4 /]

The STETZERiZER® Home Kit is the perfect solution for eliminating harmful electromagnetic radiation (dirty electricity) from your home’s electrical wiring. Everything you need to clean up the average home, the STETZERiZER® Home Kit contains 20 STETZERiZER® Filters and a STETZERiZER® Microsurge Meter all in one convenient bundle.

What’s in the kit?

As referenced in the STETZERiZER® Filter FAQs, a typical home requires about 20 filters before its environment is effectively “cleaned up”. While your home may require a different number than this, we recommend purchasing 20 filters to start, which is why we offer the STETZERiZER® Home Kit. STETZERiZER® Filters are designed to work together as a system, with 20 filters being the optimum number for a typical home — one or two STETZERiZER® Filters simply cannot do the work of 20. Installing an inadequate number of filters will result in overloaded filters, leading to an ineffective solution.

In order to enjoy the maximum benefits of the STETZERiZER® Filter system, the optimum number of filters must be installed in the appropriate places throughout the home.  Filters are designed to be installed throughout the home in a pattern that corresponds to the distributed nature of the need. For example, installing two filters close to a desktop computer or a television is normally appropriate and effective. Installing filters, normally from two to six, close to the input power panel is recommended to address high frequency currents entering on the power lines. The total number of filters required depends on the size of the home, the amount of electrical equipment, and the quality of the power from the grid. Again, 20 filters will, in most cases, be adequate for the typical home.

The preferred installation method is to be guided by the STETZERiZER® Microsurge Meter, which is why we’ve included it in the STETZERiZER® Home Kit.  The STETZERiZER® Microsurge Meter measures the amount of high frequency energy present on a building’s electrical wiring. Readings of 30 or lower indicate an acceptable environment, while readings of 50 or higher indicate a need for additional filters. Readings between 30 and 50 are marginally acceptable, but should be reduced if anyone in the area is electrically sensitive.


The actual square footage of your home is not necessarily a determining factor for selecting the pro

per number of STETZERiZER® Filters.  In our experience, however, a larger home will generally have more electronic devices in use and will require a greater number of STETZERiZER® Filters to clean up the dirty electricity present on its wiring. The reader is encouraged to review the STETZERiZER® Microsurge Meter Product Description, the STETZERiZER® Filter Installation Instructions, and the STETZERiZER® Filter Frequently Asked Questions.